| Model | 275 | 315 AC |
| Power mode | Manual/ Pneumatic | Manual/Pneumatic |
| Sawing& cutting capacity | ○ | 80 | 90 |
| square tube | 75×75 | 85×85 |
| angle iron | 75×75 | 85×85 |
| ▭ | 85×65 | 110×75 |
| round tube | 38 | 55 |
| solid square tube | 38×38 | 50×50 |
| Max gap of clamp(MM) | 85 | 110 |
| Cutting angle | 45°, 90° | 45°, 90° |
| Main Motor(KW) | 1.3/1.8 | 1.8/2.4 |
| Suitable size for saw blade(mm) | 250,275, 300 | 250,275,300 315 |
Top10 advantages of circular saws:
1, greatly improve and ease installation safety as well as fire
safety;
2, precision cutting, after cutting the tube on both sides are
flat, easy to connect;
3, Simple cutting method, fast speed, saving a lot of working time;
4,Providing lightweight working method, you can design your own
cutting programme according to the workplace (site);
5,High safety, no need to move the pipe by hand when working;
6, cutting will not produce sparks and dust to the outside world;
7, full-featured, can cut the electric power system of a variety of
well-built pipe;
8, cutting pipe materials such as: steel, stainless steel, cast
iron, copper, plastic, multi-layer pipe can be cut.
9, no specific requirements for pipe diameter and working platform;
10, good quality and low price, cost-effective.
Main Technical Parameters Sheet
Model | MC-275F | MC-315F | MC-275AC | MC-315AC | MC-315Y |
Max. Cutting Capacity | ¢76×2mm | ¢89mmx2.5mm | ¢76×2mm | ¢89mmx2.5mm | ¢89mmx2.5mm |
Cutting Angle | 90° or Angle Cutting | 90° or Angle Cutting | 90° or Angle Cutting | 90° or Angle Cutting | 90° or Angle Cutting |
Motor Power | 2.0/2.4Kw | 2.4/3.0Kw | 2.0/2.4Kw | 2.4/3.0Kw | 2.4/3.0Kw |
Blade Rotating Speed | 60/120 Giri/M | 60/120 Giri/M | 60/120 Giri/M | 60/120 Giri/M | 60/120 Giri/M |
Available Blade Size | ¢250/275mm | ¢250/275/300/315mm | ¢250/275mm | ¢250/275/300/315mm | ¢250/275/300/315mm |
Cooling Pump | 40W | 90W | 40W | 90W | 90W |
